Before I move to the Joyce part
, I wanted to summarize a bit
what I'm doing here.
It's the first time I'm
building a deck, I'm not an
expert, my job is something
else.
But I decided to give it a go,
because I don't have the money
to have it done.
And a little bit of research, I
think we can try to do
something.
So here, these two posts are
very close together, because
when I started the project, the
deck was smaller.
And things changed, we had to
extend it a little bit, even if
it's just a little bit, it's
squared up, it's more difficult
.
So that's why I have these two
extra posts that you can see
very close to each other, to
the previous one.
One of the edges is new, the
one 50mm back was here before.
Well, now it's done.
I suppose it was concrete
before.
Now we're going to start things
fun, putting the Joyce in.
So I did have my orders just
hurrying yesterday. The timber
at the top here, they are 90x45
, 3.6m long.
I will put them every 400mm, it
's a bit of a conservative for
the deck. I can spread it a
little bit more, but 400mm will
give me a bit more structure.
Especially for me starting the
deck, it was more safe.
So at the moment, I cut with a
5mm first here, 6.1mm need to
be cut, and I will keep going
like that.
And just to summarize what I've
done before, here you can see
actually the Joyce lie on the
bearer.
The bearer is 190x45, their
double bearer wasn't
necessarily required, but that
's a bit safer for me.
The deck will be 5m long and 3m
wide, and then you're going to
join the whole terrace.
I'll explain a bit later what's
going to be the ending here.
But yeah, today, putting the
Joyce in. That's it!