good morning so this is a
couple of days later after
quite a lot of rain
uh well that's okay so last
time we were able to put a
second
coat so two coats on the stairs
and on the deck
all cover and yeah it worked
well as expected and now i will
have a bit of time again and i
will try
to work on this end rail part
here i started already was a
video a few days earlier about
that
what can happen here hopefully
i get get better get faster
putting it to put this top cap
here
to begin with and then put
everything on this uh and this
rail on that direction
um i'm gonna drop so here i got
a few enough of this uh 90 by
35 that i'm using
and uh yes so we'll do a lot of
that only once that is finished
i'll be able to tackle the
the balustere that run vertical
in between that and as well a
part of the end rail
i got a solution for the stairs
i'll show you that once i get
that
there that's it so now the end
rail is finished all around the
deck this one was the last bit
um all right so the only thing
as i noted before is this hard
wood this post not all of them
but
this one and two other they're
so hard that i need to pre-dr
ill and those thing with the
impact
drives just can't go through it
's going to break the screw it's
interesting so i have to pre-dr
ill
it uh but that's end up like
that it's all good uh then i
will uh next time next thing
is to do the end rail on the
stairs so here it's a little
bit different i got some help
i bought this so i actually
installed one out of two
already i bought this post pre
pre-made
pre-cut it's uh i screw it to
the stair it's not a uncare to
the ground it is screw to the
stairs
which itself is uncare to the
ground oh it's quite cheap i
think the end of the series it
costs me
15 each it's got half of the
section neatly cut on an angle
to fit the stairs and angle
here at
the top as well just perfectly
to put the cap of the end rail
it's marble it's quite solid
it's a bit of a difficulty is i
have to because two attachments
it's strong enough but the
second
one at the bottom i realize it
's it's it's falling to exactly
the anchor screw that is in the
bottom
of the concrete here so a bit
of a difficulty to put this
screw in the end i'm able to
force this
one in but i have to be careful
the next one i'm putting it do
not fall into the same trap
uh so i'll do that now and then
i can put the i can put same
thing as the rest of the end
rail
we'll have three rail here one
at the bottom two at the top
and uh yes i'll do that now
good afternoon so we are a
couple of days later i did
finish the day
of my previous video uh the end
rail on the stairs uh a little
bit more fiddly as you would
expect
is this angle to get right uh
if you go at the top
yeah i have to finish with a
bit of a nod hole here um but
otherwise it's just exactly the
same principle as for the end
rail of the rest of the deck to
through a piece of wood and now
i'm
gonna put by this chair and
that's it the same thing to the
slider and where it's done as
well
outside so the overview that
looks like uh like that
nice all right so now next
thing i do is cutting the ball
ista