Ok, so now we're going to
attach the balustere to the
handrail.
So the idea is quite simple.
This goes straight touching the
calf rail here, and then it
goes down.
So the cut is made in order
that it stops just before the
end of the bottom rail.
And the good thing about this
design is that even if the
spacing of the two rails is a
bit different,
it's ok if the spacing of the
bottom remaining space is a
little bit different.
And I'm just going to space
them every mostly 120mm per
regulation.
And I'm going to put all of
them.
That's for all the leg parts,
this is that size.
I don't know, like 80cm or 90cm
.
And then it's got cuts like
that here as I was saying
before for rein evacuation.
And flat on the top.
For the stairs, it's cut on
both sides, so it looks like
that.
It's elevating.
Let's go straight forward, and
then attaching with one screw
at the top and probably two at
the bottom to make it a bit
stable.
We'll see how it goes if I put
one or two screws.
And that's it, so let's go, let
's do it.
[Music]